This is a Roll In Retarder Prover Room with stainless steel door and integral condenser.
Supplied with touch screen controller with WIFI connectivity
Dimensions: W950mm x D1325mm (1535mm with ramp) x D2400mm
Designed to hold the following trolleys configurations: 1 x Bakery Tray 30" x 18", 1 x 600mm x 800mm Tray, 1 x GN2/1 pan or 2 x GN1/1 pan (subject to rack dimensions)
Please refer to the AFT011 Technical Sheet in the Useful Documents Section
Requires 13 amp plug connection with 1 metre of the room. With an integral condensate tray, this room does not require a drainage connection.
The Everlasting Fermalievita (FL) range of humidity-controlled Retarder Prover cabinet, counters and ROLL-IN rooms have been specifically designed to control the temperature -10⁰C to +40⁰C and humidity 55% to 95% for the retarding, storage, leavening, proving and holding of fresh and frozen dough products.
The room is supplied with a ramp and is designed to take a variety of oven trolleys and bakery racks, designed for use with GN1/1, GN2/1, 600 x 400(mm), 600 x 800(mm) and 30" x 18" trays/pans/shelves.
Everlasting Bakery ROLL-IN Retarder Prover, with single solid door, provides 70kg of dough capacity.
The easy to use and programmable 7” TFT touch screen graphic display panel, offers both manual and automatic overnight cooling and heating modes, saving time and energy, whilst ensuring the product is kept in the best possible condition.
Includes pre-cooling and phased temperature and humidity management.
Humidity is supplied by the integrated water boiler.
The room requires a ¾ inch freshwater connection within 1 metre of the room, with shut off valve and should be used with a water filter.
This Roll In Room is fitted with a top mounted energy efficient and environmentally friendly R290 refrigeration system, with ventilated evaporator, constructed with a stainless-steel exterior and interior and fitted with with LED lighting as standard.
Designed to operate effectively in environments of up to +43°C, with good air flow and where condenser cleaning routines are maintained.
Please consider that this room will need 500mm between the top of the room and the ceiling or extraction.
Please also consider access when selecting this retarder prover system.
This is a Roll In Retarder Prover Room with stainless steel door and integral condenser.
Supplied with touch screen controller with WIFI connectivity
Dimensions: W950mm x D1325mm (1535mm with ramp) x D2400mm
Designed to hold the following trolleys configurations: 1 x Bakery Tray 30" x 18", 1 x 600mm x 800mm Tray, 1 x GN2/1 pan or 2 x GN1/1 pan (subject to rack dimensions)
Please refer to the AFT011 Technical Sheet in the Useful Documents Section
Requires 13 amp plug connection with 1 metre of the room. With an integral condensate tray, this room does not require a drainage connection.
The Everlasting Fermalievita (FL) range of humidity-controlled Retarder Prover cabinet, counters and ROLL-IN rooms have been specifically designed to control the temperature -10⁰C to +40⁰C and humidity 55% to 95% for the retarding, storage, leavening, proving and holding of fresh and frozen dough products.
The room is supplied with a ramp and is designed to take a variety of oven trolleys and bakery racks, designed for use with GN1/1, GN2/1, 600 x 400(mm), 600 x 800(mm) and 30" x 18" trays/pans/shelves.
Everlasting Bakery ROLL-IN Retarder Prover, with single solid door, provides 70kg of dough capacity.
The easy to use and programmable 7” TFT touch screen graphic display panel, offers both manual and automatic overnight cooling and heating modes, saving time and energy, whilst ensuring the product is kept in the best possible condition.
Includes pre-cooling and phased temperature and humidity management.
Humidity is supplied by the integrated water boiler.
The room requires a ¾ inch freshwater connection within 1 metre of the room, with shut off valve and should be used with a water filter.
This Roll In Room is fitted with a top mounted energy efficient and environmentally friendly R290 refrigeration system, with ventilated evaporator, constructed with a stainless-steel exterior and interior and fitted with with LED lighting as standard.
Designed to operate effectively in environments of up to +43°C, with good air flow and where condenser cleaning routines are maintained.
Please consider that this room will need 500mm between the top of the room and the ceiling or extraction.
Please also consider access when selecting this retarder prover system.
Your questions are important to us, therefore we will aim to respond quickly. The more information you can provide us with, the more efficient we will be in our response.
We are proud to exclusively represent leading European manufacturers;
Everlasting, Meatico, Cold Mark, Orion, Panem International, and A.I Guidovie Meat Hanging and Transportation
Working closely with other high profile brands such as Coreco, Infrico, Fosters, Longoni, Lucabo, Oklin UK, Orion and Oscartielle we are able to supply
the best and most suitable professional refrigeration through the UK and Ireland
