TThis is a Roll In Retarder Prover Room with glass panel stainless steel door and integral condenser.
Supplied with touch screen controller with WIFI connectivity
Dimensions: W950mm x D1325mm (1535mm with ramp) x D2400mm
Designed to hold the following trolleys configurations: 1 x Bakery Tray 30" x 18", 1 x 600mm x 800mm Tray, 1 x GN2/1 pan or 2 x GN1/1 pan (subject to rack dimensions)
Please refer to the AFT211 Technical Sheet in the Useful Documents Section
Requires 13 amp plug connection with 1 metre of the room. With an integral condensate tray, this room does not require a drainage connection.
The Everlasting Fermalievita (FL) range of humidity-controlled RetarderProver cabinet, counters and ROLL-IN rooms have been specifically designed to control the temperature -10⁰C to +40⁰C and humidity 55% to 95% for theretarding, storage, leavening, proving and holding of fresh and frozen doughproducts.
The room issupplied with a ramp and is designed to take a variety of oven trolleys andbakery racks, designed for use with GN1/1, GN2/1, 600 x 400(mm), 600 x 800(mm)and 30" x 18" trays/pans/shelves.
EverlastingBakery ROLL-IN Retarder Prover, with single stainless steel door with vision glass panel , provides 70kg of dough capacity.
The easy to useand programmable 7” TFT touch screen graphic display panel, offers both manual and automatic overnight cooling and heating modes, saving time and energy,whilst ensuring the product is kept in the best possible condition.
Includes pre-cooling and phased temperature and humidity management.
Humidity issupplied by the integrated water boiler.
The roomrequires a ¾ inch freshwater connection within 1 metre of the room, with shut off valve and should be used with a water filter.
This Roll In Room is fitted with a top mounted energy efficient and environmentally friendlyR290 refrigeration system, with ventilated evaporator, constructed with astainless-steel exterior and interior and fitted with LED lighting as standard.
Designed tooperate effectively in environments of up to +43°C, with good air flow and where condenser cleaning routines are maintained.
Please consider that this room will need 500mm between the top of the room and the ceiling or extraction.
Please also consider delivery and installation access when selecting this retarder proversystem.






· Stainless steel door with visionglass panel
· Easy touse touch screen controller
· WIFI connectivity formanagement and visibility of performance
· Humidity control 55% to 95%
· Manual and automatic cooling andproving cycles (programable)
· Internal LED lights
· Uniform and consistent airflow
· High performance temperaturerecovery
· HACCP alarms and probe alerts
· Environmentally friendly energyefficient R290 refrigerant
· Single phase 220-240/1/50Hzconnection with 13am plug
· Easily replaceable monoblockrefrigerating unit
· High grade AISI stainless steel chassisand ramp
· No need for drain connection, includes self-condensatetray
TThis is a Roll In Retarder Prover Room with glass panel stainless steel door and integral condenser.
Supplied with touch screen controller with WIFI connectivity
Dimensions: W950mm x D1325mm (1535mm with ramp) x D2400mm
Designed to hold the following trolleys configurations: 1 x Bakery Tray 30" x 18", 1 x 600mm x 800mm Tray, 1 x GN2/1 pan or 2 x GN1/1 pan (subject to rack dimensions)
Please refer to the AFT211 Technical Sheet in the Useful Documents Section
Requires 13 amp plug connection with 1 metre of the room. With an integral condensate tray, this room does not require a drainage connection.
The Everlasting Fermalievita (FL) range of humidity-controlled RetarderProver cabinet, counters and ROLL-IN rooms have been specifically designed to control the temperature -10⁰C to +40⁰C and humidity 55% to 95% for theretarding, storage, leavening, proving and holding of fresh and frozen doughproducts.
The room issupplied with a ramp and is designed to take a variety of oven trolleys andbakery racks, designed for use with GN1/1, GN2/1, 600 x 400(mm), 600 x 800(mm)and 30" x 18" trays/pans/shelves.
EverlastingBakery ROLL-IN Retarder Prover, with single stainless steel door with vision glass panel , provides 70kg of dough capacity.
The easy to useand programmable 7” TFT touch screen graphic display panel, offers both manual and automatic overnight cooling and heating modes, saving time and energy,whilst ensuring the product is kept in the best possible condition.
Includes pre-cooling and phased temperature and humidity management.
Humidity issupplied by the integrated water boiler.
The roomrequires a ¾ inch freshwater connection within 1 metre of the room, with shut off valve and should be used with a water filter.
This Roll In Room is fitted with a top mounted energy efficient and environmentally friendlyR290 refrigeration system, with ventilated evaporator, constructed with astainless-steel exterior and interior and fitted with LED lighting as standard.
Designed tooperate effectively in environments of up to +43°C, with good air flow and where condenser cleaning routines are maintained.
Please consider that this room will need 500mm between the top of the room and the ceiling or extraction.
Please also consider delivery and installation access when selecting this retarder proversystem.







· Stainless steel door with visionglass panel
· Easy touse touch screen controller
· WIFI connectivity formanagement and visibility of performance
· Humidity control 55% to 95%
· Manual and automatic cooling andproving cycles (programable)
· Internal LED lights
· Uniform and consistent airflow
· High performance temperaturerecovery
· HACCP alarms and probe alerts
· Environmentally friendly energyefficient R290 refrigerant
· Single phase 220-240/1/50Hzconnection with 13am plug
· Easily replaceable monoblockrefrigerating unit
· High grade AISI stainless steel chassisand ramp
· No need for drain connection, includes self-condensatetray
Your questions are important to us, therefore we will aim to respond quickly. The more information you can provide us with, the more efficient we will be in our response.
We are proud to exclusively represent leading European manufacturers;
Everlasting, Meatico, Cold Mark, Orion, Panem International, and A.I Guidovie Meat Hanging and Transportation
Working closely with other high profile brands such as Coreco, Infrico, Fosters, Longoni, Lucabo, Oklin UK, Orion and Oscartielle we are able to supply
the best and most suitable professional refrigeration through the UK and Ireland